Creality Laser Engraver Enclosure 2.0 with Vent, Fireproof and Dustproof Laser Cutter Protective Cover 28.3x28.3x15.7in with Fan and Pipe, Fits for Most Laser Engraver, Against Smoke, Odor, Noise

Easy to assemble and it works. I mounted mine an a piece of plywood as a base and it keeps the smoke and dust to a minimum in my shop.

Assembly was intuitive, but the instructions weren't clear for fan mounting (easy enough to guess based on pictures). All the parts were included in sealed plastic wrapping. Putting the fabric enclosure on over the frame was a little tricky (need to make sure you've pushed the poles all the way into the plastic corner pieces). Fit's snugly and the Velcro secures the enclosure to the frame. Enclosure is open on bottom so it's pretty easy to pick up and set down over laser machine. Gaps on bottom are small enough that smoke doesn't escape, but air can come in when the USB fan is on. It's easy to run cables through the holes installed, however I find running them under the enclosure is better since you can more easily pick up the enclosure to remove the material after a successful cut of a large piece of plywood. Note: There is no USB power adapter for the fan, and there is no lights inside the enclosure (some other products on Amazon have a light). I bought a simple USB light separately and wrapped the cable around the frame so it hangs and I can more easily see inside. Only concern is the clear screen doesn’t seem to filter out all of the blue light from the diode laser. I mostly got it for the fume control, so I still wear safety glasses when it’s running.

I have a similar enclosure for my Ender 3 so I thought I'd get one for my Falcon. I kept reading about the fumes and the smell and wanted to make sure that I wouldn't be affected by any of these things and was excited because it actually had a fan unlike the other enclosures that I bought. However there's one glaring and huge thing missing from this item... IT DOESN'T have a bottom, therefore easily let's out nasty smelling smoke and potentially harmful fumes from underneath the gap between the surface you rest your unit on and the metal polls. Granted it has a lot of things going for it The see through window is perfect and it does block the UV rays it has two openings for 3 inch fans one I use for the exhaust and one I use to blow air in to replace that that I'm taking out. It's very easy to get the unit in and out of, And with some minor modifications by hacking together foam base for the gaps, you can overcome it shortcomings fairly easily and cheaply. if I was purchasing again I'd probably try to find one with a base, but if this one is decently priced for you it definitely make for a great entry level enclosure.

Product works as it should, it's the perfect fit for my longer ray5 20w.

It does what it is suppose to do however, the main piece (the shell) was a little too small for the frame and the seam did rip on one of the sides white trying to put it on.

Good value and quality construction. Press parts together firmly during assembly. Light weight but sturdy. Can be vented either side which helps. It does require about 30" X 30" space. It makes me feel better about using my laser with vision protection ( I do use goggles as well ) and I vent the smoke out of the garage with the aid of a 4" inline fan as per other reviews. It may do ok with the included 3" fan and tube depending on your setup.

This enclosure is made of a metal tube structure with plastic angles, which supports the tent-like enclosure. There is no bottom part, the enclosure is more of a vent hood, a cube with 5 sides. There is a zippered front and top with colored vinyl window. The enclosure comes with an easy to attach USB powered fan and an expandable exaust hose. I bought it for my Elegoo Phecda, which is a bit larger than most; to my delight, it fits perfectly, even including the Geeks At Large camera boom. It does a great job at controlling smoke. While it’s great for a permanent setup, it’s not really what I would call “foldable” as you need to take the whole structure apart to fold it up. I added a couple of USB light strips to assist the camera. All in all, a good enclosure especially if you can leave it permanently in place. And it fits the Phecda! (Barely)

fits over my LONGER ray 5 10w laser with plenty of room to spare. keeps the smoke out of my house and almost completely keeps the smell out. helps with noise and light reduction so i can sit in the same room with my laser while it does its job. seems like it's going to be pretty durable